|International Gelcoat Cleaner
A high strength penetrating gel that quickly and easily removes stains, such as light rusting and yellowing, on GRP and painted surfaces. * Reactive formula - no need to scrub surfaces, avoids scratching. * Thick gel consistency - will not run when applied to vertical surfaces.PRODUCT INFORMATION Colour YMA622 Specific Gravity 1.02 Unit Size 500 ml APPLICATION AND USE Preparation To avoid scratches caused by dirt, clean the surface with Super Cleaner and rinse with water before treatment. Method Apply Gelcoat Cleaner/Stain Remover generously with a brush, sponge or cloth using circular movements. Leave for 5 to 10 minutes, then rinse with fresh water. Hints Mixing Stir or shake thoroughly. Some Important Points Protect from frost. Product temperature should be minimum 5°C/40°F and maximum 35°C/95°F. Ambient temperature should be minimum 5°C/40°F and maximum 35°C/95°F. Substrate temperature should be minimum 5°C/40°F and maximum 35°C/95°F. Compatibility/Substrates GRP only. Number of Coats 1 Recommended DFT Application Methods Brush Cloth/Sponge TRANSPORTATION,STORAGE AND SAFETY INFORMATION Storage GENERAL INFORMATION: Exposure to air and extremes of temperature should be avoided. For the full shelf life of Gelcoat Cleaner/Stain Remover to be realised ensure that between use the container is firmly closed and the temperature is between 5°C/40°F and 35°C/95°F. Keep out of direct sunlight. TRANSPORTATION: Gelcoat Cleaner/Stain Remover should be kept in securely closed containers during transport and storage. Safety GENERAL: Read the label safety section for Health and Safety Information, also available from our Technical Help Line. DISPOSAL: Do not discard tins or pour paint into water courses, use the facilities provided. It is best to allow paints to harden before disposal. Remainders of Gelcoat Cleaner/Stain Remover cannot be disposed of through the municipal waste route or dumped without permit. Disposal of remainders must be arranged for in consultation with the authorities.